Difference between revisions of "2013.0/Beta"

From Wiki [en] OpenMandriva
Jump to: navigation, search
(add kde 4.11)
(add minor details)
Line 55: Line 55:
= Deprecated Features =
= Deprecated Features =
== Old DrakX Installer ==
Sadly, the old DVD installer has not been used for this release due to a lack of maintenance and use. We hope to have it running and usable again soon for users.
= Changes to Hardware Support =
= Changes to Hardware Support =

Revision as of 20:31, 24 September 2013


2013.0 Beta

The OpenMandriva Cooker & QA teams are pleased to announce the availability of the 2013.0 beta!

Detailed are some of the changes that we have undergone since Mandriva Linux 2012.

This is a beta, not for use in production environments. It has received some testing and is believed to be stable. However there are still some bugs. You have been warned.

You may wish to view the Errata, located near the bottom of this page.

Available Media

The 2013.0 beta is available as a live media DVD, downloadable in ISO format. They are available on our downloads page.

Live media means you're able to run OpenMandriva LX straight from the DVD and try it before installing it. You may also install the system to hard disk either from the running live cd or from the boot manager.

Please note the recommended hardware requirements have changed; we now recommend 1 GB of memory, at least 10 GB of hard drive space (but see below for known issues with partitioning), and a suitable graphics card. We also recommend a good processor.

New Features and Major Changes

The introduction of 2013.0 is a major change from the previous version of Mandriva. This is the first release under a new name, OpenMandriva LX, and is also the first release under the new management of the OpenMandriva Association. With that in mind, here are some of the new features:

KDE 4.11

KDE 4.11 is a clean, unified desktop for OpenMandriva. It contains the tools needed to be productive while providing a nicer environment.

This beta provides KDE 4.11 with four launchers: Lancelot, the traditional KDE KickOff/KMenu, ROSA's SimpleWelcome, and Homerun Launcher. We'd like feedback on what launcher to use in the final version of 2013.0, so please make sure to voice your thoughts!

Upgrading to 2013.0

Upgrading between releases of OpenMandriva always has the potential to cause some problems. Upgrading is supported and we do test upgrades, but due to the huge range of packages and hardware configurations possible, it is always the case that in your particular situation, the upgrade may cause a problem we did not anticipate. Therefore we recommend that you always back up your system prior to upgrading.

In particular, upgrading between MDV-based packages and OMV-based packages may cause problems.

Upgrading from 2011.0

We do not currently have an official way to update this from the GUI, as our tool is not ready yet.

With the caveats mentioned above, you can still accomplish this upgrade from the command line. To do this, first ensure your system is entirely up-to-date with the latest updates for your current version of the distribution (using either MandrivaUpdate, Mandriva Online (Mandriva update notification applet) or urpmi --auto-update}}.

Then remove your existing repositories, either using the graphical repository configuration tool or the urpmi.removemedia command. urpmi.removemedia -a will remove all repositories. Then you should add repositories for this release. Run a command like this:

urpmi.addmedia --distrib --mirrorlist 'http://downloads.openmandriva.org/mirrors/openmandriva.2013.0.ARCH.list'

Substitute ARCH with your architecture, e.g. i586 or x86_64.

Then run the following commands, as root:

urpmi --auto --auto-select --replacefiles 2>&1 | tee upgrade.log

You may see an error "unknown option --replacefiles" when you first run this, but don't worry, that's normal: older urpmi versions do not have this option, but our urpmi does, and it will be passed along to our urpmi when the urpmi process is restarted after the package has been updated. This will save the output of the process to the file upgrade.log, in case you need to check it later, or you have any problems. Once the process completes, you should reboot immediately, and you should find the system has been fully updated to this version.

Deprecated Features

Old DrakX Installer

Sadly, the old DVD installer has not been used for this release due to a lack of maintenance and use. We hope to have it running and usable again soon for users.

Changes to Hardware Support

Graphics Support

Graphics support has improved with the latest drivers.

NVIDIA Graphics Cards

ATI Graphics Cards

Intel Graphics Cards


Ethernet Support

The kernel upgrade to 3.10.9 has enabled much more support, including new ethernet drivers and improved existing drivers, such as Atheros ethernet chips (alx).

Changes with Installation

Unused Hardware & Language Removal

Previously, when running the installer, you would not be prompted to remove any hardware or languages that the system did not use. However, this did lead to numerous false-positives (and even in some cases, destruction of the installed system). We have disabled the removal step until it can be remedied or a choice shown to the user (unselected by default).

Changes with the DrakX suite of tools

Changes to Software Support

Other Changes


As this is a beta, there are still issues and bugs that have not been resolved. This page attempts to document the ones that may cause inconvenience.


When using the custom partitioning tool to divide up the hard disk/s be aware that there is a minimum size requirement for the partition that contains the /usr directory of at least 4.0Gb. If the partition is made smaller that this the partition manager will not function correctly.

Workaround: If you receive an error message stating that the partition is smaller than the minimum requirement then do not try to resize it as this will fail; instead, use the auto-allocate function which will automatically create a partitioning scheme for you, which you may then delete or change to suit your own requirements. This will clear the error.

Printing with HP USB Printers

There is currently a known communication error between OpenMandriva LX and HP printers connected via USB. Anything sent to print will fail as a "device communication error".

Workaround: Sadly, there is none at this current time. This is planned to be addressed in a future update.

Contact, Bug Reporting, Discussion

You may contact the release manager or discuss this release on our forums (forums.openmandriva.org). Support is also available in the development channels, which you may view on our wiki (wiki.openmandriva.org).

Please report bugs to our bugtracker (issues.openmandriva.org). Please give as much information as you can in your report.