As with any release, there are still issues and bugs that may not have been resolved. This page documents those that may cause inconvenience and where possible details how they may be worked around.
Please read also ROME Release Notes.
Information to come. See WIP.
NVME SSDs are normally recognized by ROME Live ISO. If for some reason they are not we have couple of workarounds under 'Troubleshooting' in the ISO Grub2 Menu that may work. They are (PCIE ASPM=OFF) and (NVME APST=OFF). We hope this works for most peoples hardware.
This issue is of course very hardware specific.
On installed system user may wish to add this workaround to /etc/default/grub and
run update-grub2 to make workaround global. You would use the one that you found to
work on the Live ISO.
If (PCIE ASPM=OFF) worked for you then add:
to the lines:
and then run:
$ sudo update-grub2
If (NVME APST=OFF) worked then add instead:
As always users are encouraged to ask questions about anything you do not understand
on our forum.
Installer automatic GEOIP setting may not set the timezone correctly.
Turn your printer on and see if it is automatically configured. Pay attention to whether the
right driver was installed. If printer was auto configured and you have correct driver then
great, you are all set.
If it was not, turn off your printer. Open System Settings>Hardware>Printers or from terminal (Konsole) run:
and remove your printer.
If the correct driver was not installed by default we will need to add a software package.
The next step is to determine what software to add for your printer.
In OpenMandriva Lx this is most likely to be a 'task-printing' package specific to your
printer brand. The packages are:
Install the package that matches your brand or the misc package if none do. Example
sudo dnf install task-printing-okidata
Now turn printer on again and it should then automatically configure itself (sometimes you
might need to reboot for auto config to work). If it doesn't you can configure it with System Settings>Hardware>Printers or run from terminal (Konsole):
Alternative method to set up a printer in ROME are to use CUPS (localhost:631 as url in browser). For some hardware this may work better.
If not seek help here.
If you want to explore also additional repositories packages you will need to enable them
by means of Software Repository Selector and to refresh cache. To refresh cache you can use
--refresh option like this:
sudo dnf --refresh install foo_package
sudo dnf --refresh dsync (command to upgrade your ROME system)
Or you can use
dnf clean all like:
sudo dnf clean all ; sudo dnf install foo_package
sudo dnf clean all ; sudo dnf dsync (another command to upgrade your ROME system)
In the 'real world' multiboot works well most of the time but when there are problems
sometimes the solution is a workaround rather than a fix. These are just realities of
Also it is not currently possible for OpenMandriva QA to test our bootloader with every file
system type on every Linux distro, or even on "Top 10" Linux distros. The fact is that
whether multi-booting with Windows or other Linux distros we rely exclusively on user
reports to know what does and what does not work regarding multi-booting.
One known problem encountered with OMLx bootloader is that OpenMandriva grub2 does
not create boot entries for openSUSE systems that use btrfs file system. OMLx grub2 does
work with openSUSE systems that use ext4 file system.
This is because openSUSE uses custom syntax for their btrfs patches for openSUSE os-
prober and grub2 packages that are not compatible with OMLx code. It is not presently
known if OMLx bootloader does/does not work with openSUSE with any other file system
types such as XFS or F2FS.
The workaround is for users to switch boot-loaders in UEFI firmware settings or BIOS to the openSUSE bootloder.
As users report multiboot issues we will fix what we are able to. Issues we are unable to fix
we will report in Errata for our OMLx Releases.
Some users may experience issues with the new Pipewire sound server. If so user may switch to the older pulseaudio sound server. To do this open Konsole and run the following copy and paste command:
$ sudo dnf remove pipewire-pulse ; sudo dnf install pulseaudio-server
zypper-needs-restarting may conflict with
dnf-utils if installed.
As a workaround remove
For bluetooth devices user may need to enable systemd bluetooth.service. Open Konsole
$ sudo systemctl start bluetooth ; sudo systemctl enable bluetooth
Should you have problems please report in the English Support forum with a descriptive title and enough of a description and information for someone to be able to help you. If your issue is a serious technical issue then please file a bug report.
The OpenMandriva development teams (Cooker & QA) are always looking for new
contributors to assist in creating and maintaining packages and to assist bugfixing and
testing. You are welcome to join us and help us in this work which is not only rewarding but
also tremendous fun!
If you feel that your talents do not lie in the realm of software, then the OpenMandriva
Workshop group, which is made up from the artwork, documentation, translation and
Communication teams, is always open for the submissions of artwork and translations.
New contributors who would like to help with these wide-ranging tasks should see the wiki
for more details, and to learn how to join! Alternatively you may use our forum.
It also costs time and money to keep our servers up and running. If you can, please donate
to keep the lights on!